The main production equipment of the panel furniture production line is composed of a variety of numerical control equipment such as CNC cutting machine, edge banding machine, side hole machine, laminating machine, polishing machine and so on. Each machine has its own processing function. The main function of the cutting machine is mainly to cut the board, punch, and groove. Generally, the design of various cabinets is very convenient through the design of intelligent software. The main function of the edge banding machine is to be used for edge banding after the various shaped board are cut, so that the processed sheet is more beautiful. The main function of the side hole machine is the side hole punching function after the board is cut, such as various alloy holes and wooden pin holes. After carving and cutting the cabinet door, after grinding and polishing, it can be placed in the laminating machine for vacuum lamination by spraying and drying with high-gloss films and skin-sensitive films. These equipment have a common feature is a high degree of automation and high production efficiency. Each device cooperates with each other to meet user's individualization and diverse processing needs.

Vacuum press machine is a special equipment for paper and film. In terms of function, it can be generally divided into two types: instant coating film laminating machine and pre-coating film laminating machine. The instant coating film laminating machine includes three parts such as gluing, drying, and hot pressing. With a wide application range and stable and reliable processing performance, it is widely used among users. Pre-coating vacuum press machine, without gluing and drying parts, with the features of small size, low cost, flexible and convenient operation, it is not only suitable for laminating processing of large quantities of printed matter, but also for small batches of scattered printed matter such as automated desktop office systems machining.

The side hole machine is a practical numerical control equipment for plate furniture. It is mainly used to solve the problem that the CNC opener cannot punch side holes, and the precision of ordinary pneumatic row drills is not high, and needs repeated positioning. This side hole machine is simple and practical, and various hole position modes can be selected at will. It uses the radar sensor to sense, and hits the hole. The operation is simple and can be operated without special training of workers. Really getting rid of the dependence of traditional processing methods on workers, which not only reduces labor costs, but also improves efficiency, while avoiding waste caused by manual errors. Therefore, this type of side hole machine is very suitable for small and medium plate furniture processing.